Description
SikaBond®-T100 is a one component, zero VOC, permanently elastic, super strong, very low permeability, moisture-cure, all-in-one hybrid polyurethane adhesive that offers unlimited moisture protection, crack bridging and sound reduction for full surface wood floor bonding.150% Elongation
-
- Bonds up to 3/4" solid and engineered wood
- Cleans off prefinished floors before and after cure
- Unlimited subfloor moisture vapor protection
- No moisture testing required - a dry to touch substrate is the only requirement
- ZERO VOC
- Contains no water, solvent or isocyanates
- Low moisture vapor permeability
- Sound protection - meets local IIC and STC requirements
- Crack Bridging
- Very easy to spread
- Low odor
- Advanced Hybrid Technology
- Excellent green grab
- High elongation
- Permanently elastic - allows planks to expand and contract without damage to the adhesive
- Tenacious Bonding
- Passes USGBC LEED Version 4
Color: Off-White
Size: 4gl
*Attention: Orders with less than 4 buckets will be shipped individually. Orders of 4 or more will be shipped on a pallet.
Application Information
Ambient Air Temperature
Room temperature between 50 °F (15 °C) and 90 °F (35 °C). For ambient temperatures standard construction guidelines should be followed. Follow all wood floor manufacturers’ acclimation and room temperature requirements.
Relative Air Humidity
Between 40 % and 70 % during installation is best for adhesive. See wood floor manufacturer for wood requirements.
Substrate Temperature
During laying and until SikaBond®-T100 has fully cured, substrate temperature should be greater than 60 °F (15 °C) and in the case of radiant floor heating, less than 70 °F (20 °C). For substrate temperatures, standard construction guidelines should be followed.
Substrate Moisture Content
For use as an adhesive only: SikaBond®-T100 is not affected by moisture or vapor transmission. For protection of the wood, follow the wood floor manufacturer’s requirements for subfloor moisture. If substrate is not acceptable per wood manufacturer’s requirements, use SikaBond®-T100 at recommended coverage rate for moisture protection or use Sika® MB.
For use as an adhesive and membrane: Concrete must be dry to touch. Inspect for any wetness at base of drywall or visible signs of moisture on concrete. Concrete and cement-based underlayments must be fully cured and free of any hydrostatic and/or moisture problems. When properly applied in accordance with Sika® guidelines, SikaBond®-T100 provides unlimited moisture vapor protection.
Curing Rate
Floor may accept light foot traffic after: 8 hours
Floor can be sanded after 18 hours.
Skin Time / Laying Time
60 min |
74 °F 50 % R.H. |